โดย อีพี | 2 ก.ย. 2026 | ความรู้
Engineering note: Module is a basic tooth-size descriptor, but choosing between 0.5 and 0.8 is not only a question of which part looks smaller. It changes tooth size, available geometry, strength, manufacturability and the size of the mating components.Selection media...
โดย อีพี | 2 ก.ย. 2026 | ความรู้
Engineering note: The number of worm starts changes how quickly the wheel advances for each worm revolution. With the same wheel tooth count, a two-start worm produces a lower reduction ratio than a one-start worm.Selection media for the relevant worm or wheel family....
โดย อีพี | 2 ก.ย. 2026 | ความรู้
Engineering note: A ground tooth surface is produced by a different finishing route from a cut or thread-rolled worm. The choice affects precision family, surface finish, manufacturing cost and how the part should be paired with its wheel.Selection media for the...
โดย อีพี | 2 ก.ย. 2026 | ความรู้
Engineering note: Bronze and engineering plastic worm wheels solve different problems. Bronze offers a traditional metal pairing for sliding contact, while polyacetal can reduce mass and is available in a dedicated fine-pitch family.Selection media for the relevant...
โดย อีพี | 2 ก.ย. 2026 | ความรู้
Engineering note: A worm and wheel transmit rotation between non-parallel, non-intersecting shafts, commonly at a right angle. In a small mechanism, that geometry can combine a large reduction step with a compact envelope.Selection media for the relevant worm or wheel...
